Sanyo PLC-XU300 Command List

1/1

PLC-XU300/350 IR Command List
  □ Transmission format of LCD projector operation key
    : NEC Format (single command / command pipelining mode)
  □ Custom Code + Custom Code
: 2 patterns as below
    33h+00h(Default;code1), 33h+11h(code2)
Key
No.
Data Code
(HEX)
Function
1 17 AUTO SET
2 00 ON-OFF
3 38 COMPUTER 1
4 39 COMPUTER 2
5 3D VIDEO
6 3E S-VIDEO
7 83 COMPONENT
8 8C CURSOR UP
9 1E CURSOR LEFT
10 0F SELECT
11 1D CURSOR RIGHT
12 8D CURSOR DOWN
13 1C MENU
14 82 SCREEN
15 5B KEYSTONE
16 16 INFORMATION
17 43 FREEZE
18 8B NO SHOW
19 8A P-TIMER
20 18 LAMP CONTROL
21 01 D.ZOOM +
22 09 VOLUME +
23 0C IMAGE
24 02 D.ZOOM -
25 0A VOLUME -
26 0B MUTE

Sanyo PLC-XU300 Specifications

General

Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	- \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±30 °
Focus	Manual
Digital zoom	16 x
Aspect ratio	4:3
RS-232 ports	1
Compatibility	U-XGA S-XGA S-XGA+ W-XGA XGA S-VGA VGA Mac
Dimensions (WxDxH)	326 x 231.6 x 92.6 mm
Power requirements	100 - 240 V
F-number (relative aperture)	1.60
Lamp type	UHP
Lamp power	225 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	2500 h
Headphone outputs	2
Serial interface type	RS-232
Power consumption (standby)	3.2 W
Power consumption (typical)	287 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	2600 g
Package weight	5400 g