Sanyo PLC-XU300 - Input Source Selection (Computer 2)

28
Choose Computer 2(RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Input Source Selection (Computer 2: RGB)
Direct Operation
Menu Operation
✔ Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.45).
COMPUTER 2 button
Top Control
Remote Control
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Input and
then press the Point
8
or the SELECT button.
Use the Point
ed buttons to select Computer 2 and
then press the SELECT button.
Input Menu
Computer 2(RGB)
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
INPUT button
Computer Input
Video
Computer 2(RGB)
S-video
Computer 1(RGB) /
(Component) / (RGB(Scart))