Why won't my Sanyo PLC-XW55A turn on and says cooling?
The Sanyo Projector cannot be turned on because it is either preparing for stand-by or the projection lamp is cooling down. Please wait until the cooling process is completed.
What to do if my Sanyo PLC-XW55A cannot be turned on due to high temperature?
The Sanyo Projector cannot be turned on due to an abnormally high internal temperature. Once the projector has cooled down sufficiently and the temperature returns to normal, the POWER indicator will emit a red light, signaling that the projector can be turned on. Consider checking and cleaning the air filters to prevent this issue.
Why is the LAMP REPLACE indicator yellow on my Sanyo PLC-XW55A Projector?
The LAMP REPLACE indicator lights yellow when the projection lamp is nearing the end of its life. Replace the projection lamp promptly with a new one. Remember to reset the lamp replacement counter after you've replaced the lamp.
To Next Page
General
