Need help?Do you have a question about the Sanyo PLC-XF71 and is the answer not in the manual?
General| Projection technology | LCD |
|---|---|
| Contrast ratio (typical) | 3000:1 |
| Projector native resolution | XGA (1024x768) |
| Resolution | 1024 x 768 pixels |
| Aspect ratio | 4:3 |
| Dimensions (WxDxH) | 530 x 757 x 267.5 mm |
| Lamp type | NSH |
| Lamp power | 330 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
Weight and Dimensions| Weight | 27600 g |
|---|
Provides crucial safety warnings regarding electric shock, rain/moisture, lens staring, installation position, and ventilation.
Emphasizes correct positioning to maintain lamp life and prevent accidents or fire hazards.
Provides instructions and cautions for safely moving the projector, including retracting feet and careful handling.
Explains the function of each button on the side control panel for projector operation.
Flashes red when internal projector temperature is too high.
Indicates filter status: blinking slow/fast, or light orange for replacement needed.
Guidance on positioning the projector on a flat surface for optimal projection quality.
Details how to adjust projection angle using feet and correct keystone distortion.
Step-by-step guide to turn on the projector, including indicator lights and PIN code entry.
Detailed steps for turning off the projector, including cooling down and power cord removal.
Instructions for entering a PIN code using the side control or remote.
Describes how to position the screen using the lens shift function.
Explains how to automatically adjust computer screen settings.
Guides selecting computer input sources via DVI/D-sub 15 terminals using the menu.
Selects video source type (RGB Scart, AV HDCP) for INPUT 1.
Selects video source type (Y, Pb/Cb/Pr/Cr, Video, S-Video) for INPUT 2.
Explains automatic tuning to various computer signals like VGA, SVGA, XGA, WUXGA.
Automatically adjusts fine sync, total dots, horizontal/vertical positions for computer display.
Allows precise adjustment of parameters for special signal formats, with 10 memory areas.
Allows selection of image levels (Standard, Cinema, Image 1-10) for video sources.
Adjusts screen scale and position for Normal, Wide, or Custom modes for video sources.
Allows adjustment of contrast, brightness, color, tint, and color management.
Prevents projector operation by unauthorized persons with PIN code options.
Explains filter function, replacement indicators, and precautions for filter handling.
Step-by-step guide for replacing the projector's filter cartridge, including ordering information.
Manages projection lamps, detects status, and controls lamp mode based on lamp life.
Detailed steps for replacing projection lamps, including safety precautions and notes.
Crucial safety information regarding projector lamp handling, explosion risks, and emergency procedures.
Explains warning indicators (TEMP, LAMP) that signal abnormal conditions and required maintenance.
Provides solutions for common problems like no power, PIN code issues, no image, and abnormal icons.
Provides detailed specs for mechanical, panel, signal compatibility, optical, interface, power, environment, and remote control.
Lists conditions where Auto PC Adjustment may not work, like specific resolutions or digital input.
To Next Page
