Need help?Do you have a question about the Sanyo PLC-XF47 and is the answer not in the manual?
General| Vertical scan range | 48 - 120 Hz |
|---|---|
| Horizontal scan range | 15 - 120 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 40 - 600 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | 80 ° |
| Keystone correction, horizontal | 40 ° |
| I/O ports | Analog (D-sub15), Serial in & Serial out (D-Sub 9 x 2) |
| Video out | UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA, MAC |
| Resolution | 2359296 pixels |
| Aspect ratio | 4:3 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 581 x 815.5 x 251.5 mm |
| Power requirements | 200-240 V AC 9.7 A Max, 50 / 60 Hz |
| Connectivity technology | Wired |
| Lamp type | NSH |
| Lamp power | 330 W |
| Light source type | Lamp |
| Dot clock scanning frequency | 230 MHz |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (typical) | 1700 W |
Weight and Dimensions| Weight | 36500 g |
|---|
Essential warnings regarding light exposure, installation, ventilation, and electrical safety.
Essential safety and operating instructions to be read before product use.
Ensuring proper airflow and avoiding blockage of vents for reliable operation and preventing overheating.
Proper positioning, avoiding rolling, and ceiling mounting precautions.
Explanation of various ports like Serial, USB, DVI, D-sub, BNC, and S-Video.
How to adjust lens shift and control picture level/pitch.
Instructions for connecting various computer outputs (VGA, DVI, BNC) to the projector.
How to select computer input signals (DVI/D-sub, 5-BNC) via the On-Screen Menu.
How to select video input signals (Video, S-Video, Component) via the On-Screen Menu.
Procedures for Auto PC Adjustment and detailed manual PC adjustments for optimal display.
Setting video system (PAL, NTSC, SECAM) and selecting image levels for video sources.
Detailed settings for Contrast, Brightness, Color, Tint, and image presets.
Understanding lamp status indicators and procedures for replacing projection lamps.
Safety guidelines for handling high-pressure lamps and actions in case of explosion.
Solutions for common problems like no power, poor image, and connectivity issues.
To Next Page
