Sanyo PLC-XF47 - Input Selection and Configuration

30
Remote Control
INPUT buttons
Input
Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 buttons
on the remote control. It switches to INPUT 1, INPUT 2,
INPUT 3 or INPUT 4 as you press the INPUT button.
Before using the INPUT button on the remote control, you
must select a correct input source by On-Screen Menu
and the latest input source will be displayed.
Remote Control Operation
MENU
AUTO PC ADJ.
IMAGE SEL.
SELECT
ZOOM
FOCUS
LENS SHIFT
ON/STAND-BY
INPUT 1/2
INPUT 3/4
Side Control
INPUT 1/2 button
Press the INPUT 1/2 or INPUT 3/4 button on the side
control. It switches to INPUT 1 and INPUT 2, or INPUT 3
and INPUT 4 as you press the INPUT button.
Before using the INPUT button on the side control, you
must select a correct input source by On-Screen Menu
and the latest input source will be displayed.
Side Control Operation
Side Control button operation
Input Selection
INPUT 3/4 button
INPUT 1/2 button
INPUT 1
INPUT 2
INPUT 3/4 button
INPUT 3
INPUT 4
✔Note:
• Empty slots can not be selected.
• When a slot is empty, the input is displayed in
grayout.
Remote Control button operation
Downloaded From projector-manual.com Sanyo Manuals