17
Installation
Lens Installation
Before setting up a projector, install Projection Lens on a Projector.
1. Before installation, check where a projector is used and prepare a suitable lens. For the specifications of
Projection Lens, refer to the manual attached separately or contact sales dealer where you purchased the
projector.
2. For installation, refer to the installation manual accompanying a Projector.
When setting a projector after lens installation, be sure to replace a Lens Cap to protect a surface.
And when carrying or holding up the projector, be careful not to put your hands on lens part. It may
damage lens, cabinet, or mechanical parts.
Positioning Projector
This projector is designed to project on a flat projection
surface.
✔Note:
•
Brightness in room has a great influence on
picture quality. It is recommended to limit ambient
lighting in order to provide the best image.
SCREEN
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
Loading...
