Sanyo PLC-XF47 - Remote Control

Remote Control
Part Names and Functions
q
t
e
!0
i
!4
r
!5
!3
!1
w
y
u
o
!7
!2
!8
!6
!9
@0
e
LIGHT button
Light the buttons on the remote control for about 10
seconds.
r
MENU button
Open or close the On-Screen MENU. (pp.25-26)
t POINT ed 7 8 buttons
– Select an item or adjust the value in The ON-SCREEN MENU.
–Pan the image in DIGITAL ZOOM +/– mode. (p.39)
y
LENS SHIFT button
Select the LENS SHIFT function. (p.27)
!5
FOCUS buttons
Adjust the focus. (p.28)
u
ZOOM buttons
Zoom in and out the images.
i
FREEZE button
Freeze the picture on the screen. (p.28)
o
P-TIMER button
Operate the P-TIMER function. (p.29)
!7
KEYSTONE button
Correct keystone distortion. (pp.29,39,43)
q
ON/STAND-BY button
Turn the projector on or off. (p.23)
w
AUTO PC button
Automatically adjust the computer image to its optimum
setting (pp.28, 34).
!1
NO SHOW button
Temporarily turn off the image on the screen. (p.29)
!2
SELECT
button
–Execute the selected item.
–Expand or compress the image in the DIGITAL ZOOM
mode. (p.39)
@0
Wired Remote Jack
connect the remote
control cable (not supplied) to this jack
when using as a wired remote control.
!9
IMAGE SEL. button
Select the image level. (pp.37, 41)
!4
INPUT 1, 2, 3, 4
button
s
Select an input source. (pp.30-32)
!3
IMAGE ADJ. button
Enter the image level adjustment mode. (pp.44-46)
!8 INFO. button
Display the input source information (p.28).
!0 SCREEN button
Select the screen size (pp.38-39).
!6D.ZOOM
button
Select the Digital zoom +/- mode and resize the image (p.39).
14
✔Note:
To ensure safe operation, observe the following
precautions:
• Do not bend, drop, or expose the remote
control to moisture or heat.
• For cleaning, use a soft dry cloth. Do not
apply benzene, thinner, splay, or any other
chemical materials.
Downloaded From projector-manual.com Sanyo Manuals