Computer Input
25
Computer Input
Choose Computer by pressing the INPUT button
on the top control or press the COMPUTER button
on the remote control. Before using these buttons,
correct input source should be selected through Menu
operation as described below.
Input Source Selection
Direct Operation
INPUT button
Remote Control
Top Control
INPUT button
COMPUTER button
Computer
Video
Input Menu
Move the pointer (red
arrow) to Computer and
press the SELECT button.
Input Menu icon
Move the pointer to RGB
and press the SELECT
button.
Source Select Menu
Computer
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Input Menu icon.
1
Press the Point ed buttons to move the red
arrow pointer to Computer, and then press the
SELECT button.
2
After the Source Select Menu appeared for
Computer, move the pointer to RGB and then
press the SELECT button.
3
Menu Operation
✔ Note:
When the Input Search function is set On1
or On2, the input signal will be searched
automatically (p.45)
To Next Page
Loading...
Need help?
General
