Sanyo RCS-SH80UA - 10. How to Clear Programmed Operation; How to Change Programmed Operation Times

9. How to change programmed operation times
1 In the ordinary indicator mode, press the PROGRAM button.
2 Press the DAY button to move the operation reservation indicator ( ) to the day the programmed operation
times of which you want to change.
3 Press the SET button.
4 By pressing the SET button, times indicators blink in turn in the order described below. Make the time to
change blink.
5 Press the HH or/and MM button to change the time.
6 Press the SET button.
7 Press the PROGRAM button to complete the change.
10. How to clear programmed operation
• How to clear programmed days
1 Press the PROGRAM button.
2 Press the DAY button to move the operation reservation indicator ( ) to the day the program of which should
be cleared.
3 Press the CLEAR button.
The programmed times for the day will turn off.
4 Press the PROGRAM button.
The operation reservation indicator ( ) will turn off.
• How to clear a program of a day
1 Press the PROGRAM button.
2 Press the DAY button to move the operation reservation indicator ( ) to the day a program of which should
be cleared.
3 Press the SET button.
4 Press the SET button again to make the ON-time or OFF-time of the program to clear blink.
5 Press CLEAR button.
The program will be cleared and programs left will be automatically arranged to fill the cleared program.
6 Press the PROGRAM button.
OI-432-03 - 12EG
3 - 12
3
3 TM-SH80UG 5/2/01 3:21 PM Page 12