Need help?Do you have a question about the Sanyo RM-DB5 and is the answer not in the manual?
General| Type | Clock Radio |
|---|---|
| Brand | Sanyo |
| Model | RM-DB5 |
| Display Type | Digital |
| Power Source | AC Power |
| Alarm Function | Yes |
| Radio Bands | AM/FM |
| Tuner Bands | FM/AM |
| Speaker | Built-in |
General safety instructions for operation, cleaning, power sources, and cord protection.
Malfunction due to electrostatic discharge requires product reset for normal operation.
Warning to prevent fire or shock hazard by not exposing the appliance to dripping or splashing.
Connect AC power cord and press STANDBY/ON to switch the unit ON. Unplug AC to switch off.
Clock synchronizes automatically upon first power-up. Manual setting is not required.
Features Dual Alarm with buzzer or radio wake-up modes. Two individual alarms can be set.
Press SNOOZE button to temporarily switch off alarm for 5 minutes, indicated by "Zz".
Allows the radio to switch off after a set period (e.g., 10 to 90 minutes).
Extend wire antenna vertically for best DAB/FM reception.
Radio enters DAB mode on first power-up, performs auto scan, and selects the first station.
Select "Autoscan local" or "Autoscan full" to search for DAB channels.
Manually tune through DAB channels by frequency to find desired stations.
Indicates availability of additional services related to the primary station.
Instructions for selecting FM, auto-search, manual search, and audio mode.
Store up to 10 favorite stations to presets by holding PRESET button and selecting number.
Recall stored stations by pressing PRESET button and scrolling to desired preset.
Automatically updated time and date from broadcast information.
Displays the frequency of the currently tuned station.
Shows the digital audio bit rate of the received station.
Visual representation of signal strength using a slide bar.
Scrolling message from broadcaster, including programme details.
Describes the style of broadcast programme, if available.
Collection of radio stations transmitted together on a single frequency.
Resets the radio to original factory settings, losing stored stations.
Automatically adjusts display brightness based on room light conditions.
Instructions for cleaning the unit with a soft cloth and lukewarm water.
Lists power supply, output power, frequency range, dimensions, and weight.
Lists common symptoms, possible causes, and corrective actions for operational issues.
To Next Page
