Heat exchanger
Heat exchanger
Fan bearing
Fan
8-10. Removing the Fan
(1) Remove 3 screws.
(2) Uphold the left side of the head exchanger so that it is
not seated anywhere (so as to remove the fan).
Pull the fan bearing toward you and remove it, and
remove the fan as pulling it from underneath.
NOTE
Be sure to proceed after having removed
the drain pan (Air Outlet Ass'y) and fan
motor according to sections "8-8. and 8-9."
NOTE
When sliding the heat exchanger or remove the fan,
be sure to wear work gloves so as not to injure your
hands by fins of the heat exchanger.
To Next Page
Loading...