Sanyo SGP-E70J2GU2 - Page 34

Outdoor Unit
B - 29
(1)Measuring points
(2)Vibration Force
3.15 4 5 6.3 8 10 12.5 16 20 25
0.77 0.10 0.29 1.40 3.51 11.75 13.96 20.18 28.84 76.74
F
F
0
-2.3 -19.8 -10.8 2.9 10.9 21.4 22.9 26.1 29.2 37.7
16.4 23.9 18.2 27.4 31.2 30.6 32.9 37.3 46.3 34.0
31.5 40 50 63 80 100 125 160 200 250 315
103.51 73.28 156.68 131.83 38.02 46.77 56.23 40.27 83.18 90.16 85.11 309.03
40.3 37.3 43.9 42.4 31.6 33.4 35.0 32.1 38.4 39.1 38.6 49.8
29.8 31.4 50.2 26.2 24.4 31.5 24.8 27.3 41.0 36.8 46.0 53.5
3.15 4 5 6.3 8 10 12.5 16 20 25
0.71 0.06 1.29 3.98 8.13 15.67 23.44 47.32 19.95 53.09
-3.0 -24.4 2.2 12.0 18.2 23.9 27.4 33.5 26.0 34.5
16.2 22.5 20.4 30.9 35.8 33.8 34.6 37.9 41.5 41.8
31.5 40 50 63 80 100 125 160 200 250 315
76.74 107.15 139.64 334.97 358.92 147.91 164.06 197.24 149.62 107.15 43.15 638.26
37.7 40.6 42.9 50.5 51.1 43.4 44.3 45.9 43.5 40.6 32.7 56.1
31.3 30.0 47.5 26.7 29.7 40.9 21.9 21.4 26.0 24.9 24.3 50.8
F :
Vibration force(N)
F :
0
1N
F :
Vibration force(N)
F :
0
1N
Frequency(Hz)
Vibration forceF(N)
Vibration force level 20 Log
10
Vibration acceleration (dB)
F
F
0
Frequency(Hz)
Vibration forceF(N)
Vibration force level 20 Log
10
Vibration acceleration (dB)
1/3 octave
1/3 octave
Result
Result
For all areas of engine revolution speed and engine load, the maximum vibration force at each frequency is measured.
170, 90 type
Maximum values when the engine revolution speed is changed in the range 800-2000min
-1
2120, 150, 190 type
Maximum values when the engine revolution speed is changed in the range 800-2200 min
-1
7.Vibration Force
Vibration-proof base top
GHP
(Front)
Vibration force measuring point