To Next PageTo Next PageHow to check power supply wiring for Sanyo Air Conditioner?
To ensure your Sanyo Air Conditioner is functioning correctly, verify that the power supply wires are properly connected between terminal numbers 1 and 2 on the 3P terminal plates located in both the indoor and outdoor units.
General| Brand | Sanyo |
|---|---|
| Model | SPW-X253GH56 |
| Category | Air Conditioner |
| Language | English |
Detailed specifications for each model's indoor and outdoor units.
Technical details of key components like motors, coils, and valves.
Specifications for transformers, thermistors, relays, and valves.
Physical dimensions and layout diagrams for indoor and outdoor units.
Diagrams illustrating refrigerant flow in cooling and heating cycles.
Specifies the temperature and humidity limits for unit operation.
Explains how the unit regulates room temperature using thermostat settings.
Describes how the unit prevents cold air discharge during heating.
Details how indoor fan speed adjusts automatically based on room temperature.
Explains outdoor fan speed adjustments based on outdoor temperature.
Describes the system's mechanism to prevent indoor coil freezing in cooling mode.
Explains control of condensing temperature via outdoor coil temperature.
Describes the function that prevents the air conditioner from overloading.
Explains compressor motor protection from overheating by discharge temperature.
Details the automatic switching between cooling and heating modes.
Explains the defrosting system operation for the outdoor heat exchanger.
Describes the function of the 4-way valve in directing refrigerant flow.
Explains the unit's power failure recovery function.
Describes the electronic valve for precise refrigerant flow control.
Provides temperature data for compressor discharge gas under various conditions.
Explains the circuit that detects and protects against compressor overcurrent.
Details the operation mode for removing moisture without significant temperature drop.
Describes the control of air flow direction by the auto-flap.
Explains the operation of the drain pump in different modes.
Details the control logic for the electronic refrigerant control valve.
Explains the system's protection against abnormal power voltage.
Provides wiring diagrams and schematics for the indoor unit.
Provides wiring diagrams and schematics for the outdoor unit.
Guides for diagnosing and resolving unit malfunctions and errors.
Flow charts for diagnosing cooling and heating problems.
Guides for identifying issues based on symptoms and inspecting related parts.
Step-by-step guide for operating the unit in test mode for diagnostics.
