- 3 -
SPECIFICATIONS
Camera
Image pickup device : 1/3-inch CMOS sensor
Effective pixels : 16:9 1920 (H) x 1080 (V), 4:3 2288 (H) x 1712 (V)
Lowest image illumination : 50IRE: 1.0 lx (at F1.2, color mode, high gain)
Lowest image illumination : 50IRE: 0.06 lx (at F1.2, black-and-white mode, high gain)
Video S/N ratio : 50 dB (when AGC is “OFF”)
Lens mount : CS mount
Flange back adjustment : 12.5 ± 0.5 mm, electrical flange back adjustment (Focus assist function)
Day/Night function : Auto, color, black-and-white, alarm input switching
White balance : Auto (ATW), one push (AWC), manual (R/B gain adjustable),indoor, outdoor, fluorescent
Backlight compensation : Multi-spot evaluative metering, center-weighted evaluative metering, masking, face detection
Electronic sensitivity boosting : Auto (32 x max) or Off
Electronic shutter : 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (VCC-HD2300P)
Electronic shutter : 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (VCC-HD2300)
Electronic shutter : Long exposure shutter (1x, 2x, 4x, 8x, 16x, 32x)
Electronic iris : ON/OFF (Set [SHUTTER] to “EI”.)
Iris control : DC iris lens supported
Camera settings : Selectable between 2 camera setting patterns
AGC gain : Normal/ Middle/ High (Manual gain setting possible at Off)
Gamma correction : 0.45, 1, Mode 1, Mode 2
Aperture compensation : On/Off (Correction level adjustable)
VIVID COLOR EFFECT : ON/OFF
DNR : ON/OFF
Mirror : H/V/HV/OFF
Privacy mask : On/Off, max. 8 mask patterns
Motion sensor : On (masking/ detection area setting)/ Off
Language selection : English, French, German, Spanish, Japanese
I/O
Video output : Composite output
LAN : 10BASE-T/ 100BASE-TX (RJ-45 connector)
Alarm input : 2 (NO/NC), also serving as Day/Night switching signal
Alarm output : 2 (NO/NC, 16V, 150 mA, open collector)
To Next Page
Loading...
