You can click one grid cell after another to set or cancel the masked area cell by cell.
To deselect a block of grid cells in the masked area, right-click one of grid cell and drag the mouse.
3 Click SET and then BACK .
The settings are saved and you return to the sub menu.
Use AWC if auto trace white balance (ATW) does not reproduce a natural white balance.
AWC allows you to automatically adjust the white balance by simply clicking SET with the camera lens directed
toward a white wall, white paper and the like.
1 In [WHITE BALANCE], select “AWC”.
2 Direct the camera lens toward a white wall, white paper and the like and, in [AWC LOCK],
click SET .
If the white balance adjustment does not reproduce desirable results, click SET again.
You need to follow the above steps also to re-adjust the white balance when the lighting conditions have been
changed.
To fine-tune the white balance after this adjustment, in [GO TO MWB], click SET .
You can set the color temperature to a fixed value.
Workin
To Next Page
Loading...
