Sets the backlight compensation function.
If you do not use the backlight compensation function, set [BLC] to “OFF”.
MULT: Multi-spot evaluative metering
CENT: Center-weighted average metering
MASK: Masking for backlight compensation
Multi-spot evaluative metering compensates for the backlighting problem by evaluating the photometry of the
entire screen.
Use the / button to select [BLC], use the / button to choose “MULT”, and press the SET
button.
The BLC SETTING screen for multi-spot evaluative metering appears.
Use the / button to select [BLC WEIGHT] and use the / button to adjust the backlight
compensation weight (sensitivity).
Available settings: 0 (low sensitivity) to 15 (high sensitivity)
Use the / button to select [BRIGHT] and use the / button to adjust the compensation
level for the brightness of the backlighting.
Available settings: 0 (minimum brightness compensation) to 15 (maximum brightness compensation)
Select [MENU] and choose “BACK” or “END” to complete adjustment.
Center-weighted average metering compensates for the backlighting problem by measuring the specified
compensation zone intensively.
Use the / button to select [BLC], use the / button to choose “CENT”, and press the SET
button.
The BLC SETTING [POSITION] screen appears, showing the backlight compensation zone in the center area.
1
2
3
4
1
23 / 100
To Next Page
Loading...
