Use the buttons to determine the position of the backlight compensation zone and
press the SET button.
The BLC SETTING [SIZE] screen appears.
Use the buttons to determine the size of the backlight compensation zone and press
the SET button.
The BLC WINDOW WEIGHTING screen appears.
Use the / button to select each spot to be weighted and use the / button to set the
weighting value.
Spot evaluative metering will occur in five spots: TOP, BOTTOM, LEFT, RIGHT, and CENTER.
The weighting value of [CENTER (FIX)] is fixed to “7”.
Available settings: 0 (minimum) to 7 (maximum)
2
3
Use the / button to change the vertical size. Use the / button to change the horizontal size.
4
24 / 100
To Next Page
Loading...
