Set the alarm disable duration to prevent the motion sensor, after detecting a motion and outputting an alarm
signal, from detecting subsequent alarm motions for that period.
Use the / button to select [DURATION] and use the / button to choose the alarm disable
duration.
Available settings: 5S, 10S, 15S, 20S, 30S, 45S, 1M, 2M, 3M, 4M, 5M (S = seconds, M = minutes)
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
2
36 / 100
To Next Page
Loading...
