Sanyo VCC-XZ600P - Changing the Password (PASSWORD CHANGE)

Use the / button to select [PASSWORD CHANGE], and press the SET button.
The PASSWORD <NOW PASSWORD> screen appears.
Use the / button to select the digit and use the / button to select a number for the digit.
Repeat this procedure until the current password value (ex. 1234) is entered, and press the SET
button.
When the valid password is entered, the PASSWORD <NEW PASSWORD> screen appears.
Use the / button to select the digit and use the / button to select a number for the digit.
Repeat this procedure until the new password value (ex. 4321) is entered, and press the SET
button.
“OK” appears under the <NEW PASSWORD> field, and the new password is set.
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
2
3
4
63 / 100