These buttons allow you to perform the following operations.
These operations may be performed with the Web browser installed on your PC. For details, refer to the linked
information.
Operation Associated button and use Equivalent network operation screen
Restoring factory default
settings
Press the NEAR button ( 1 ) and the SET button
( 3 ) simultaneously
OPTION SETTINGS (FACTORY
DEFAULT)
Resetting login password
Press the FAR button ( 2 ) and the SET button
( 3 ) simultaneously
USER SETTINGS
Adjusting focus
For details, refer to the “Lens Adjustment”
section.
CAMERA SETTINGS (FOCUS
ASSIST/IRIS SETTINGS)
Adjusting iris
Inverting video of wall-
mounted camera
Press the REVERSE button ( 4 ) Not supported via network operation
For details, see the “Installation
Manual”.
Restarting camera
Press the RESET button ( 5 ) CAMERA SETTINGS (CAMERA
REBOOT)
Viewing Firmware Version
For details, refer to the “Viewing Firmware
Version” section.
OPTION SETTINGS (FIRMWARE
UPDATE)
Introduction 6
To Next Page
Loading...
