Depending on the configured resolution, the available options for image quality and frame rate may
be limited.
1 Configure the resolution (RESOLUTION).
The available options vary depending on your selection in [ASPECT RATIO].
16:9: 1920×1080, 1280×720, 640×360, 320×180
4:3: 1600×1200, 1280×960, 1024×768, 640×480, 320×240
2 In [PRIORITY], select whether you put priority on the video/image quality or the bit rate.
QUALITY, BITRATE
When your selection in [PRIORITY] is “QUALITY” (PICTURE QUALITY)
Then, the system shows an appropriate bit rate depending on the selected quality.
BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
When your selection in [PRIORITY] is “BITRATE” (BITRATE)
Type the bit rate directly, if you want to change it.
3 In [FRAME RATE], select the frame rate of the stream.
The available options vary depending on the model used.
VDC-HD3300/VDC-HD3100: 15ips, 30ips
VDC-HD3300P/VDC-HD3100P: 12.5ips, 25ips
Depending on the configured resolution, the available options for image quality and frame rate may
be limited.
4 Select the H.264 video streaming method (PROTOCOL) and click SET .
UDP (Unicast), RTSP, HTTP, MULTICAST
To Next Page
Loading...
