To Next PageTo Next Page
Need help?Do you have a question about the Sanyo VHR-H690 and is the answer not in the manual?
Guidance on selecting a proper installation place for the VCR.
Safety instructions to prevent electrical hazards and fire.
Explains cause and prevention of condensation inside the VCR.
Details recording and playback durations for different tape speeds.
Provides guidelines for proper handling and storage of video cassettes.
Instructions on how to insert a cassette into the VCR.
Instructions on how to remove a cassette from the VCR.
Identifies and describes the buttons and ports on the VCR's front panel.
Explains the VCR's indicator panel and its various displays.
Details the icons displayed for different VCR operations.
Shows examples of VCR indicator panel displays.
Identifies and describes the connection ports on the VCR's back panel.
Identifies and describes the buttons on the universal remote control.
Instructions for installing batteries and operating the remote control.
Guide to programming the remote to control different devices.
Instructions for operating cable/DSS devices with the remote.
Describes connecting VCR, TV, and cable converter without a built-in tuner.
Explains connections for cable TV with scrambled channels.
Guide to setting the output channel for cable converter/decoder.
Explains how to connect the VCR for stereo sound output.
Details audio/video connection for a stereo TV.
Details audio/video connection for a stereo system.
Automatic process to set RF channel, channels, and clock.
Methods for selecting channels using the remote or front panel.
How to remove unwanted channels from memory.
How to add channels manually to the tuner memory.
How to change the VCR's RF output channel after initial setup.
Details various on-screen displays like status, operation mode, and tape duration.
Steps to access and navigate the VCR's on-screen menus.
Overview of the options available in the main menu.
How to access the VCR setup sub-menu.
Details the various options within the VCR setup menu.
How to adjust the clock automatically or manually.
Steps for manually setting the VCR's clock.
How to adjust the clock for daylight saving time.
Steps to reprogram channels after initial setup.
How to play back tapes with copyguard protection.
How to adjust picture settings manually during playback.
Explains the VCR's automatic picture adjustment feature.
How to manually adjust tracking for noise reduction.
How to check Hi-Fi sound indicators during playback.
Feature to track recorded programs by channel, date, and time.
How to watch one program while recording another.
Options for recording from different input sources.
Automatically adjusts recording speed to fit tape.
How to view and manage a list of recorded programs.
How to assign a program type to a recording for the list.
Explains Hi-Fi stereo and MTS broadcast signals.
Describes indicators for stereo and SAP broadcasts.
How to select MTS modes for watching/recording.
Covers various playback modes: search, still, slow motion, frame advance, double speed, endless.
Steps to set up timer recordings using PlusCode numbers.
Covers setting, checking, clearing, and changing timer recordings.
How to handle overlapping timer recordings.
How the VCR automatically sets end time from XDS signal.
Tips for using the AUTO QTR setting.
Information on VCR head cleaning and maintenance.
Instructions for cleaning the exterior of the VCR cabinet.
General
