Sanyo VM-EX25P - Page 14

CAMCORDER OPERATION
The fade-in will bring the picture and sound gradually. Press the 'T' side of power zoom button for a close-up
Fade-out will do the reverse, gradually erasing the picture shot (A: Zoom-in) and the 'W' side for a wide-angle shot
and sound. (B: Zoom-out).
1 For example, after recording a title, set the camcorder
to recording pause mode, then press the FADE button.
A
AL
GV
Q
2 Press the REC START/STOP button. The picture and
sound will gradually fade in from a white background.
IS Note: During the fade-in or fade-out “FADE” flashes
in the viewfinder. Do not press the REC
START/STOP button while “FADE” is flashing
in the viewfinder, as that will cancel the fade-in
function.
3 Press the REC START/STOP button again. The
picture and sound will gradually fade out to a white
background, and the camcorder will go into recording
pause mode and the fade function is cancelled. IS Notes:
@ Picture vibration is more noticeable when Zooming in
to record a close-up shot. If possible, use a tripod or
make sure that the camcorder is kept steady.
@ When the POWER switch is set to “OFF”, the zoom
will automatically return to the full zoom-out position.
i Note: During recording, the fade-out function can be
cancelled or turned on by pressing the FADE
button.
13