Sanyo VPC-E1090 - Slideshow

Photo & Video Playback 37
Using the Playback Menu
English
When all images to be printed are tagged, remove the memory card and take it to a
photographic shop for printing, or use it with a DPOF compatible printer.
To set DP OF:
1. Press the MENU button to select DPOF from the menu at
the playback mode, then press the OK button to enter the
DPOF function.
2. Press the UP/DOWN navigation buttons and the OK button
to select from the available options:
3. Use the UP/DOWN navigation buttons to set the number of
copies you wish to print.
Slideshow
The Slideshow function allows you to view all stored photos in
a continuous sequence.
To view a slideshow:
1. Press the MENU button to select SLIDESHOW from the
menu, then press the OK button to enter the Slideshow
function.
2. Press the UP/DOWN navigation buttons and the OK button
to select from the available options:
• THIS IMAGE: Select to print the current image.
• ALL IMAGES: Select to print all images.
• EXIT: Select to exit to the main menu.
• START: Select to start the slideshow.
• INTERVAL: Select to set the interval time between each photo during the slideshow.
Use the LEFT/RIGHT navigation buttons to set a value in seconds. The
default setting is 5 seconds.
• LOOP: Select to enable/disable a continuous loop of the slideshow. Select ON or
OFF (default) from the submenu.
• EXIT: Select to exit to the main menu.
THIS IMAGE
ALL IMAGES
EXIT
DPOF
1/1401/1401/140
10M10M
88
Number of copies
START
INTERVAL
LOOP
EXIT
SLIDESHOW
1/1401/1401/140
5 sec
OFF
3M3M