Sanyo VPC-E1600TP - Battery Safety Precautions; Charger and Device Compatibility; Outer Casing and Fluid Contact Risks

105

■ Do not transform, take apart, or
modify
• Any modification, by transforming,
disassembling, or directly soldering to
the battery, etc., will possibly cause the
battery to catch fire, explode, or leak or
spew battery fluid.
DANGER WARNING
■ Do not connect the (+) and (–)
terminals with a wire or other
metal implement. Do not carry
loose or keep with necklaces,
hairpins, etc.
• Doing so may result in a short circuit,
high voltage flow, fire, explosion,
leaking or spewing battery fluid, or heat
generation. Metal such as a wire or
necklace, etc. may cause heat to be
generated.
DANGER WARNING
■ Do not throw the battery in the
fire or subject it to heat
• Doing so may cause the insulation to
melt, damage the gas discharge valve
and safety mechanisms, or ignite the
battery fluid, resulting in fire or
explosion.
DANGER WARNING
■ Do not drop, hit, trample, or
submit the battery to strong
shocks
• If the safety mechanisms and protective
devices are broken, an abnormal
chemical reaction may occur inside the
battery, or cause the battery to catch
fire, explode, leak or spew battery fluid,
or generate heat.
DANGER WARNING
■ Do not allow the battery to come
into contact with fresh or salt
water, or allow the terminals to
become wet
• If the safety mechanisms and protective
devices are damaged by corrosion, an
abnormal chemical reaction may occur
inside the battery, or cause the battery
to catch fire, explode, leak or spew
battery fluid, or generate heat.
DANGER WARNING