47
Using Pre-composition Mode
When asking someone else to take images for you, but the images always don’t come up right?
Pre-composition helps you get the background you want, even if you need to ask someone else to
record the image for you.
Basically, Pre-composition is a two-step process
.
• Take a pre-composed image.
• Shoot again according to the previous stored image.
1. Compose the background you want and press the
Shutter button (full press), which causes 1/3 of
semi-transparent image of the background to remain
on the LCD monitor.
2. Tap the
button to cancel the semi-transparent
temporarily image.
3. Ask someone else to record a shot of you against your
original pre-composed background, telling him/her to
compose the image by using the 1/3 semi-transparent
screen image as a guide.
4. Move your position until photographer confirms your
whole or half body in the frame and in the right place.
Semi-transparent bar
5. Press the shutter button. Camera stores the image
produced by this step only.
To Next Page
Loading...
