Sanyo VPC-E875 - Image Quality; Focus Zone; EV Compensation

Capture Settings 21
The Capture Menu
English
Image Quality
The Image Quality setting refers to the
compression ratio of the JPG. The higher the image
quality, the less the image compression ratio but
more memory space is required. Use the Up/
Down navigation buttons to select from the
options. Three settings for image quality are
available:
• Best (default)
•Better
•Good
Focus Zone
The Focus Zone setting allows you to select the
number of zones the camera will focus on when
taking a photo. Use the Up/Down navigation
buttons to select from the options. Three settings
for focus zone are available:
• Multi-Zone (default)
• Center
• Selected Area: When this option is set, press
the OK button to enable AF area selection. The
new setting is applied to the Live View image each time the navigation buttons
are pressed. Press the OK button to return to the Capture mode and save the
current setting, which will take effect until it is changed again.
EV Compensation
The EV Compensation menu allows you to adjust
the exposure or amount of light that enters the
lens while capturing photos or videos. Use this
feature to lighten or darken the image when the
brightness between the subject and background is
not balanced or when the subject occupies only a
small part of the photograph. Use a positive (+) EV
compensation for spotlit subjects, especially
against dark backgrounds or scenes with low
reflectivity, such as green or dark foliage.
Use the Up/Down navigation buttons to modify the value. This setting can be
modified from -2.0 to +2.0 in a 0.3 or 0.4 increment/decrement.
IMAGE QUALITY
BEST
BETTER
GOOD
FOCUS ZONE
MULTI-ZONE
CENTER
SELECTED AREA
EV COMPENSATION
0.0 EV