22 Getting Started
Taking your First Photo
English
Using the Self-timer and Burst Photography
The camera comes equipped with a self-timer which allows you to take photos after a pre-defined delay.
The burst photography feature allows you to take multiple consecutive photos by pressing and holding
the Shutter button. The multi-burst photography feature allows you to take multiple (16) consecutive
VGA photos by pressing the Shutter button once.
To set the self-timer/burst mode:
1. Press the Right/Self-timer /Burst mode navigation button to cycle through the self-
timer( or ) and burst photography options ( or ) on the LCD screen.
2. Once you have selected an option, frame and take your shot. In self-timer mode, the icon will flash
until the time expires and the photo is taken.
3. After taking a photo, the Self-timer automatically exit. If you want to use these functions for the
next photo, press the Right/Self-timer /Burst mode navigation button again to activate the
function.
Note:
: Burst Mode
Up to 2 photos by pressing the shutter button continuously.
: Multi-Burst Mode
16 photos continuously by 1 press of the Shutter button.
To Next Page
Loading...
