EN-41
Canceling the Protection
To cancel protection for only one image, display the image that you want to remove the image
protection.
1. Select [Protect] with the S / T buttons from the playback menu, and press the SET button.
2. Select [Single] or [All] with the S / T buttons, and press the SET button.
3. Select [Cancel Protect] with the S / T buttons, and press the SET button.
J The removal of image protection is executed and the camera returns to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the S / T buttons from the playback menu, and press the SET button.
2. Select [Select] with the S / T buttons, and press the SET button.
J The images are displayed in the thumbnail display.
3. Select the image you want to protect with the S / T / W / X buttons, and press the DISPLAY
button.
J The protect icon [ ] is displayed with protected images. Selecting a protected image and
pressing the DISPLAY button again will cancel the protection. This procedure is repeated to
select multiple images.
4. Press the SET button.
J Protection and cancellation the protection are executed and the camera returns to playback
mode.
J Formatting an SD/SDHC memory card overrides protection, and erases all images
regardless of their protected status.
To Next Page
Loading...
