EN-45
5. Select [Execute] with the S / T buttons, and press the SET button.
J To not erase, select [Cancel], and press the SET button.
J Deleting an image will not affect sequential image numbering. For example, if you
delete image number 240, the next captured image will be numbered 241 even though
240 no longer exists. In other words, an image-number is retired when an image is
deleted and will not be reused or reassigned to another subsequently captured image.
Erasing selected images
This erases a number of selected images.
1. Slide the mode switch to [
].
2. Press the
button.
J The deletion menu will be displayed.
3. Select [Select] with the S / T buttons, and press the SET
button.
J The images are displayed in the thumbnail display.
4. Select the image you want to erase with the S / T / W / X
buttons, and press the
button.
J The [ ] icon will be displayed. One more press of the
erase button will cancel the operation. Repeat this
procedure and select all the images that you want to erase.
5. Press the SET button.
Delete
SET:Enter
MENU:Exit
100-0010100-0002
To Next Page
Loading...
