Sanyo VPC TP1000 - Choosing the Language; Formatting the Memory Card or Internal Memory

EN-18
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD
monitor.
1. Tap the Mode / Scene mode icon to set the camera to
any scene mode; or press the button.
 The default mode is [ ].
2. Press the MENU button.
3. Drag the slide bar down to the end of the menu.
Tap [ ] to enter [Setup] menu.
4. Tap language icon to enter [Language].
5. Touch the panel and slide to left or right to select the
language.
6. Tap the language icon you want to display on the touch panel.
 The setting will be stored.
7. To exit from the [Setup] menu, tap [ ].
Formatting the Memory Card or Internal Memory
This utility formats the memory card (or internal memory) and erases all stored images
and data.
1. Tap the Mode / Scene mode icon to set the camera
to any scene mode; or press the button.
 The default mode is [ ].
2. Press the MENU button.
3. Drag the slide bar down to the end of the menu.
Tap [ ] to enter [Setup] menu.
4. Tap [ ] to enter [Format].
5. Tap [Execute] .
 To cancel formatting, tap [Cancel] .
6. To exit from the [Setup] menu, tap [ ].