Sanyo VPC-X1250 - How to Switch the Recording Mode

English 22
How to switch the recording mode
Your camera can capture single still photos (single-shot mode), record video
clips (video clip recording mode), and also capture a series of still photos
(sequential shots mode).
1 Press the ON/OFF button to
turn the camera on.
2 Press the [m] button.
h The screen to set the
recording mode and the self-
timer appears.
3 Press the [m] button to select
the recording mode.
4 Press the SET button.
h The selected recording mode
is set.
h An icon in the upper left area
of the monitor indicates the
active recording mode
setting.
149
ON/OFF button
[m] button
SET button
<Recording mode>
s: Single-shot mode
:
H igh-speed sequential shots mode
O: Sequential shots mode
X: Video clip recording mode