1
Functions
1.1
automatic correction: The first item of ADC ADJUST
1.2
RC (remote control) KEY DESCRIPTION:
1.2.1Press up or down button to choose item
1.2.2Press right button to enter the submenu
1.2.3Press menu button to return to previous menu
1.3
STATEMENT: In this manual, parameters for illustration only, not directly as a reference
parameter set application
2
How to open Factory Menu
2.1
Press menu button of RC (remote control) then follow with key 1,1,4,7 one by
one.
2.2
Factory main menu as follows:
3
SHIPPING INIT
Press up/down navigation key to choose SHIPPING INIT then press right navigation
Key on remote to perform shipping operation
4. AGING MODE
Press up/down navigation key to choose AGING MODE then press right navigation key
Of remote to put set into aging mode or burning mode.
Page No. 011
To Next Page
Loading...
