5. ADC ADJUST
Press up/down navigation key of RC to choose ADC ADJUST then press ENTER key to go into
Submenu of it.
SOURCE:
There is “RGB, option in SOURCE. When select RGB, parameters below will be
available for RGB. Press
up/down
button to choose the item below(R-GAIN, G-
GAIN, B-GAIN, R-OFFSET, G-OFFSET, B-OFFSET etc.) and press left/right key to
adjust the parameter value.
AUTO ADJUST
This option will automatically adjust the ADC parameters.
6. Picture Setting
Press up/down navigation key of RC to choose PICTURE SETTING then press
OK key to go into the submenu of it. After that again press up/down navigation
key to choose WB ADJUST then press OK key to go into submenu of WB
ADJUST.
Source: this option to select which source for the parameters below.
COLOUR TEMPERTURE: press left/right key to choose the TEMPERTURE,
can select temperature of picture.
Press
up/down
key to choose the items of the mode(R-GAIN, G-GAIN, B-
GAIN, R- OFFSET, G-OFFSET, B-OFFSET etc.), then press left/right key to
choose the parameter value.
Page No. 012
To Next Page
Loading...
