Sanyo XT-43S8100FS - Using Your TV; Accessing TV Channels; Watching Connected Devices; Volume Control and Muting

Using your TV
14
Accessing channels
Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the buttons: press the buttons on
the remote control or the corresponding buttons on the
TV set to scroll through the channels.
Using the LIST buttons: press the LIST buttons on
the remote control to display the channel list and press
Ÿź
/ and OK to select channels.
Watching connected devices
Press H O ME o r I n pu t on the remote control.
Press Ÿź
/ to select your desired
source, and then press OK
Volume
Volume control: press the VOL +/- buttons on the
remote control or the corresponding buttons on the TV
set to increase or decrease the volume.
Sound mute: press the
button to temporatily mute
the sound. Press this button again or the vol + button
to restore the sound.
CH /
CH /
Using System Settings
1. Press MENU on the remote control to display its
options: Picture, Sound, Channel, Smart TV,
Network, System and Support.
Picture preset
2. Press Ÿź to select the desired item, then press
OK to enter the corresponding submenu.
3. In submenus, press Ÿź to select menu
options, then press OK to enter the option list,
the adjustment interface, or the corresponding
submenu.
4. Press
to return to the previous menu.
5. Press EXIT to close the menu.
Note: You can also press M E N Uon the remote
control, select Settings (if available) and
press OK to enter the Settings menu. Some
options may not be available for certain
signal sources.
Picture
The menus for adjusting the picture are used to
obtain the best picture settings according to your
preference, the type of program you are watching
and the ambient lighting.
Select MENU > Picture, then the Picture menu
appears on the right with the following options. Press
ŹWRHQWHUDQGXVHŸźWRFKRRVHDQRSWLRQ
Note: Some options may not be available for
certain modes. Some options may appear in the
next page of the Picture menu, you can press
ŸźWRVZLWFK
: Use ŻŹ to scroll through the
picture preset settings: Standard, Vivid,Soft
Cinema, Sports and User.
Brightness: Adjusts the brightness of the picture.
Contrast: Adjusts the difference between light and
dark areas of the picture.
Color : Adjusts the richness of color.
Sharpness: Adjusts the crispness
of the edges in
the picture.
Tint: Adjusts the balance between the red and green
levels.
Colour temperature: Adjusts the colour temperature
of the picture. Use ŻŹto scroll through the colour
settings: Cool,Normal,Warm and Custom.
Back Light:
adjusts the backlight level which affects
the overall brilliance of the picture.
Overscan: Set Overscan function to
Auto format: Enables/disables the aspect ratio
selection automatically.
Aspect: 8VHŻŹWRVHOHFWWKHSLFWXUHVL]H1RWH
You are recommended to use the full screen mode.
Do not use the display mode with black bars on both
sides of the picture (such as 4:3) for a long time,
otherwise the TV screen may be damaged permanently.
On or Off.
Source
TV
AV
HDMI1
HDMI2
HDMI3
USB
Picture preset
Backlight
100
100
50
50
50
50
Normal
Brightness
Contrast
Color
Tint
Sharpness
Color temperature
Overscan
Advanced settings
Picture reset
Standard
Picture
Sound
Channel
Smart TV
Network
System
Support
On
...
...