14
1. Open IE browser, type IP 192.168.1.1(P1), or open
“My Network Place”, and click SAPIDO_GR-1733 (P2).
(P1)
192.168.1.1
2. Fill in default Username and Password
to login(P3).
3. Please confirm the “Operation Mode” is default Router Mode, and
select “One Button Setup”(P4) on the left menu.
admin
admin
(P3)
(P2)
SAPIDO_GR-1733
(P4)
Connecting this Router to a WiMAX modem
：
It can be configured without Internet.
※
We suggest using WiMAX modem with a USB extended cable for the best performance.
※
Please find update support list at SAPIDO offical website.
4. Select “WAN Interface” is WiMAX, and starts the setup and wireless encryption.
(RB-1800/RB-1802/RB-1842 are not supported)
5. After the setting is finished, you should see a “change successful” page with a countdown. When the countdown
is completed, your wireless network and security will be active, and you should be able to login immediately with
the new password. However, if an error message shows up, please refresh the page and it will go back to the
entering page. Afterwards, you can access Internet.
To Next Page
Loading...
Need help?
General