Sapling SAL Series - Table of Contents

2
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
SAL/SALG Series Wireless Clocks
Table of Contents
Table of Contents 2
Important Safety Instructions 3
Identify Your Clock 4
Synchronization System Setup 5 - 7
Wall Mount Installation -
- Round SlimLine Clock - Battery Powered 8 - 10
- Locally Powered 11 - 14
- Round Aluminum/Wood Clock - Battery Powered 15 - 18
- Locally Powered 19 - 23
- Square Clock - Battery Powered 24 - 27
- Locally Powered 28 - 31
Flag Mount Installation -
- Round SlimLine/Aluminum Clock - Battery Powered 32 - 39
- Locally Powered 40 - 47
- Square Clock - Battery Powered 48 - 54
- Locally Powered 55 - 61
Double Mount Installation -
- Round SlimLine/Aluminum Clock - Battery Powered 62 - 67
- Locally Powered 68 - 73
- Square Clock - Battery Powered 74 - 80
- Locally Powered 81 - 87
Legacy Movement - Battery Powered 88
Frequently Asked Questions 89 - 90
Troubleshooting 91 - 92
Diagnostic #1 - Signal Information 93
Diagnostic #2 - Signal Quality 94
Diagnostic #3 - Manufacturing Default 94 - 95
Diagnostic #4 - Battery Voltage 95
Warranty 96
FCC Statement 97
Manuals may change without prior notice
VERY IMPORTANT:
INSTALL, POWER, AND SET YOUR MASTER
CLOCK OR REPEATER BEFORE POWERING THE
SECONDARY WIRELESS CLOCKS
A Wireless Master Clock and any Repeaters must
be properly installed, powered, and set up BEFORE
you attempt to set up a wireless clock system. If
the Master Clock and Repeaters are not powered,
the secondary clocks will not synchronize.