Need help?Do you have a question about the Sapling SBP Series and is the answer not in the manual?
Differentiates between DANGER, WARNING, and NOTICE hazards for safe clock installation and operation.
Instructions for connecting the clock to a PoE switch for power and data.
Instructions for connecting the clock to a PoE injector for power and data.
Steps to configure static IP using an existing DHCP server on the network.
Steps to configure static IP using a crossover cable without a DHCP server.
Configuring the clock to use external NTP time servers via the internet.
Configuring the clock to use a local NTP server or master clock.
Lists items included in the flush mount clock package and wiring kit.
Lists items included in the wall mount package and optional items.
Steps for mounting to a double gang electrical box.
Steps for mounting using the clock's keyhole slots.
Overview of dual-faced and flag-mounted clock setups and mounting.
Lists items included in the mounting pole package for dual/flag mounts.
Instructions for attaching the display board and removing protective film.
Details the device list, task bar, and other main screen features.
Explains Send, Groups, Filters, and other task bar options.
Options to remove devices, clear selections, or mark devices as priority.
Functions for sending messages and countdowns to clocks.
Options for downloading configurations and updating firmware.
Clearing all entries from the monitor.
Interpreting character colors (Red, Gray, Black) for clock status.
Field for entering the clock's web interface password and accessing it.
Settings for time/date format, brightness, and seconds display.
Choosing temperature unit and applying/canceling changes.
Configuring passwords, clock name, and network sync.
Setting network parameters like IP address and DHCP status.
Setting up NTP servers and rotation options.
Viewing NTP status and performing sync actions like resyncing.
Selecting methods for setting DST changes like day of week or by country.
Configuring email alerts for clock events like sync timeouts or restarts.
Assigning actions to external input triggers like Code Blue or relay activation.
Clearing the event log and navigating through log entries.
Controlling IP address display and simple count-up using clock buttons.
Steps to remove clock housing for surface and flush mounts.
Steps to diagnose and resolve power issues with the clock.
Steps to troubleshoot inability to access the clock's web interface.
Steps to resolve issues with inaccurate time synchronization.
Procedure to restore the clock to its original manufacturer settings.
General| Model | SBP Series |
|---|---|
| Category | Clock |
| Synchronization | Wireless |
| Mounting Options | Wall, Ceiling |
| Display Type | LED |
| Wireless Frequency | 900 MHz |
| Dimensions | Varies by model |
To Next Page
