Sapling SBP Series - Table of Contents

2
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Manuals may change without prior notice
SBP Series IP Clocks - Table of Contents
Interactive Hyperlinked PDF – Click on the topic and the document will go to the
relevant page. Clicking on the logo will take you back to the table of contents.
Table of Contents 2
Important Safety Instructions 3
Identify Your Clock 4 - 5
Before Installation
- System/Network Requirements 6
- Power over Ethernet (PoE) 7
- Network Monitoring Software 8
- DHCP 9
- Static IP 10 - 11
- Clock Setup - GMT/UTC Offset 12
- Clock Setup - Network Servers 13 - 15
Preparing for the Installation 16
Flush Mounted Clock Mechanical Installation 17 - 19
Wall Mounted Clock Mechanical Installation 20 - 24
Dual-Faced/Flag Mounted Digital Clocks Overview 25
Dual-Faced/Flag Mounted Clock Mechanical Installation 26 - 33
Uniform Stage Installation 34 - 36
Temperature Sensor Installation 37
Buzzer Installation 38
User Input Installation (3300 Only) 39
Outputs (3300 Only) 40
Network Monitor Software
- Main Screen 41 - 43
- Task Bar Options 44 - 48
- Quick Access Menu 49 - 50
- Error Messages 51
Web Interface
- Log In 52
- Date and Time 52
- Display Settings 53
- Brightness Schedule 54
- Clock Settings 55 - 56
- Network Settings 57
- Network Servers 58
- Clock Status 59
- Daylight Saving Time (DST) 60
- Email Alerts 61
- Elapsed Timer 62
- Inputs 63 - 64
- Log 65
Reading the Display 66
Manual Controls 67
Accessing the Clock After it has been Installed 68
Frequently Asked Questions 69
Troubleshooting 70
Warranty 71
Available with 3200 and 3300 models
Available with 3300 model only