Sapling SBP Series - Clock Setup - Network Servers; Third-Party NTP Time Servers

3) Time Input – From Third-Party NTP Time Servers:
The clock comes pre-programed with third-party NTP Time Servers accessible via the facility network and
internet. These pre-programed Time Servers can be viewed or changed in the “Network Servers” tab of
the clock built-in web interface (as shown in the below image). In order to allow the clock to access the
third-party NTP Time Servers, port number 123 must be open in the facility network firewall.
The time server address text boxes in the clock’s web interface are changeable, allowing the user to delete
the default third-party NTP Time Servers and program the clock to receive time data from different third-
party NTP Time Servers by typing their IP addresses or URLs into the text boxes.
13
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
13
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Before Installation - Clock Setup - Network Servers
Network Cable Network Cable Network Cable
PoE Switch
Data Switch
Modem
Router
Third Party NTP Time Servers
IP Digital Clock
IP Digital Clock
IP Analog Clock