26
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Square Clock - Battery Powered
5) Insert the wall anchors into the holes, then place
the self-tapping screws through the mounting piece
and into the wall anchors.
7) First remove the gearbox pin, then insert the
batteries into the clock. If the clock is within range
of a powered transmitter, the hands should begin to
move within a minute.
6) Remove the back cover from the battery pack
by pulling the two latches away to either side and
sliding the cover out.
8) Place the cover back onto the battery pack.
You should hear a snapping noise as the
latches engage.
1
2
To Next Page
Loading...
