Sapling SAL Series - Flag Mount Installation - Square Clock - Locally Powered; Included in Package

55
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Flag Mount Installation - Square Clock - Locally Powered
Description
Square analog clock
Quantity
1
Picture
Included in Package
If any of the items listed in the kits are missing, you may contact your dealer and order a replacement kit.
Continued on next page
VERY IMPORTANT:
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY
WIRELESS CLOCKS
A Wireless Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If
the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
Dual-mount pole, including
mounting plate.
#8-32x7/16 screw
M3.5-1.0x10 screw (black)
Internal-tooth washer
#10-32x3/8 green screw
#6-32x1 screw
Flag Mount Endcap
1
8 (4 used)
4 (not used)
8 (4 used)
1
4
1
Included in Pole Kit (SAB-1BD-00S-0 or SAB-1BD-01S-0)