Sapling SAL Series - Double Mount Installation - Round SlimLine;Aluminum Clock - Locally Powered; Included in Package

68
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Dual-mount pole, including
mounting plate.
#10-32x3/8 green screw
#8-32x7/16 screw
M3.5-1.0x10 screw (black)
Internal-tooth washer
#6-32x1 screw
1
1
8
4
8
4
Description
Round SlimLine analog clock
Quantity
2
Picture
Included in Package
Included in Double Mount Kit (SAH-1BD-12R-0 or SAH-1BD-16R-0)
Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered
If any of the items listed in the kits are missing, you may contact your dealer and order a replacement kit.
Continued on next page
VERY IMPORTANT:
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY
WIRELESS CLOCKS
A Wireless Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If
the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.