9
10
8
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round Metal Clock
10) Use the two M4-0.5x10 screws to attach the clock to the mounting bracket. The screws should
pass through the top and bottom holes on the clock, followed by the top and bottom holes of the
mounting bracket.
9) Attach the clock to the mounting piece so that the hole at the top of the clock lines up with the hole
at the top of the mounting piece, and the hole at the bottom of the clock lines up with the hole at the
bottom of the mounting piece.
To Next Page
Loading...
