EasyManua.ls Logo

Sargent EC200 - Technical Data & Approvals; Outline Specification; Dimensions; Approvals

Sargent EC200
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sargent Electrical Services Ltd. Copyright 2005
Issue 03 Page 10 of 11 12 May 2005
5 TECHNICAL DATA & APPROVALS
5.1 Outline Specification
INPUT 230v 230 Volts / 0 to 16 Amps + / - 10%
OUTPUT 230v
RCD protected, 3 x MCB outputs of 10, 10 and 6A via 2 x
9 way connectors
INPUT 12v 2 x 20A battery inputs via a single 6 way connector
OUTPUT 12v
20A total output via 4 x 16A switched channels protected
by 7 fused outputs via a 15 way connector
Integrated CHARGER
Input 110-240 Volts AC +/- 10%, Frequency 50 Hz +/- 6%,
Current 3.15A max.
DC Output 13.5 Volts nominal, Current 16 Amps max (200
Watts).
Signal INPUT
4 x Fresh water level, 2 x Waste water level, 1 x Engine
running via a 8 way connector
Fresh water negative sensed
Waste water negative sensed
Data IN / OUT
Data communication and power to Control Panel via 20
way IDC header connector
IP rating IP31
Operating
temperature
Ambient 0 to 35° Centigrade
PSU case temperature with full load 65° C Max
Automatic shutdown and restart
if overheated / overloaded
5.2 Dimensions
Overall size (HxWxD) 240 x 370 x 110mm Fixing centres 210 x 360mm
PSU2007
Clearances 75mm above, 20mm below, 50mm left & right Weight 3.2 Kg
Overall size (HxWxD) 80 x 193 x 40mm Fixing centres 175mm
CONTROL PANEL
Cut-out size (HxW) 60 x 165mm Weight 170 g
5.3 Approvals
System: BSEN 1648-1, BSEN1648-2 compliant, BS7671: 2001 compliant
Residual Current Device: RCD 40A 30mA trip to BS EN 61008
Miniature Circuit Breakers: MCBs (10 & 6A) type C 6000A breaking capacity to BSEN 60898
Electro Magnetic Compatibility (EMC) directive 89/336/EEC
Integrated Charger: BS EN 60335-1/2.29, 89/336/EEC, IEC61000-3.2/3:1995, EMC certificate 5172TC 3
rd
party
tested.
5.4 Declaration of Conformity
Equipment: Leisure Power Control System Model name: PSU2007 / EC200 -STD / -DLX / -STD SW
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the
above referenced approvals. The unit complies with all essential requirements of the Directives.
Signed: Name: Position: Manufacturer:
Date:
I L Sargent Technical Director
Sargent Electrical Services
Ltd
Unit 39, Tokenspire
Business Park
Woodmansey
Beverley
East Yorkshire
United Kingdom