Saris M2 - Page 38

38
LED Color
Green
White
Blue
Blue
Blink Rate
1Hz
Solid
1Hz
Solid
Meaning
Default power-on state
ANT+ FE-C protocol controlling trainer
Bluetooth device connected but not control-
ling trainer
Bluetooth device controlling
How to resolve problem or other details
In this state nothing is paired and the trainer will
simulate the power curve of our Fluid2 trainer.
This state is entered after being paired and
receiving the rst ANT+ FE-C command. It will not
return to green until power is cycled.
Often an app on a device has connected to the
trainer as a power meter.
Some apps will connect to the trainer but not
issue a control command, which would also leave
the trainer in this state.
When the device disconnects from the trainer the
LED returns to blinking green.
A device has connected and issued a control
command.
Will not return to blinking blue from this state.
When the device disconnects from the trainer the
LED returns to blinking green.
29263B_Saris M2 Trainer Manual_indesign file-PLK.indd 3829263B_Saris M2 Trainer Manual_indesign file-PLK.indd 38 2/1/2021 2:29:46 PM2/1/2021 2:29:46 PM