Sartorius Stedim Biotech BIOSTAT STR - User Manual

96 pages

Save Page as PDF

To Next Page

85037-541-29

Operating Instructions

BIOSTAT

STR

Original Operating Instructions

Main Page

Table of Contents3
User Information5
Notes on Using These Instructions5
Differentiating between System Types5
Explanation of Symbols6
Explanation of Terms6
Safety8
Intended Use8
Approved Operating and Process Media9
Basic Hazards10
Operator Responsibilities12
Personnel Requirements13
Specifications14
Dimensions and Weights14
Operating Conditions15
Connection Values and Energy Supply Lines (Defaults)15
Manufacturer's ID Label16
Design and Function17
Supply Equipment/System Design17
Temperature Control17
Aeration18
Stirring System18
Sample BIOSTAT ® STR Structure18
Bag Holder19
STR Bag19
Materials and Versions19
Configuration and Connections19
Control System19
Hardware19
Peripheral Connections20
Software20
Transportation, Packaging and Storage21
Safety Instructions for Transportation21
Transportation Inspection21
Packaging21
Storage22
Storage of STR Bags (Cultibag STR and Flexsafe STR)22
Installation and Initial Startup23
Checks Prior to Setup and Connection23
Completeness of Delivery23
Requirements Relating to Laboratory23
Setup and Connection24
Overview of Connections on the Tower25
Dimensions, Connecting Energy Supply Lines29
Biostat ® Str29
Connections and Energy Supply Lines (Defaults)29
(For DW Only)29
Disposal Facilities29
Initial Installation ("Bag Holder on the Tower")29
Using the Probe Holder31
Components of the Probe Holder31
Installing the Probe Holder32
Operation33
Process Preparation/Installation of the STR Bag33
Safety Instructions for Operation33
Daily Inspections34
STR Bag34
Installing the STR Bag36
Preparing the Bag Holder36
Unpacking the STR Bag38
Inserting and Inflating the STR Bag43
Installing the Tri-Clamp Connection of a Filter Line49
Additional Process Preparations50
Installing Sensors on the STR Bag50
Overview of the Probes50
Fixing the PT100 Temperature Sensor51
Activating the Single-Use Sensor Port and Installing the Fiber Optic52
Cables52
Calibrating the Sensors54
Installation and Connection54
Concluding Process Preparations55
Startup and Operation55
General Information55
Safety Information55
Starting up the Temperature Control Circuit (for DW Only)56
Filling the STR Bag56
Motor Control57
Process Control with the DCU457
Startup of the DCU4 System57
Principles of Operation57
Main Function "Main57
Main Function "Trend57
Main Function "Calibration57
Main Function "Control Loops57
Settings" System Configuration57
Other57
Notes on Running Processes/Sampling58
Sampling58
General Notes58
Removal through the Sampling Port58
Uninstalling a STR Bag60
Maintenance63
Safety Information for Maintenance63
Maintenance Work64
General Cleaning and Preventative Maintenance64
Maintenance Schedule64
Concluding Processes, Cleaning and Maintenance65
Measures for Concluding a Process65
Cleaning Bag Holder and Tower66
Basic Cleaning and Storage66
Measures to Take after Maintenance66
Malfunctions67
Safety Information for Troubleshooting67
Handling Malfunctions67
Troubleshooting67
Repairs/Replacement Part Information67
Disassembly and Disposal69
Safety Information for Disassembly and Disposal69
Disassembly69
Disposal/Decontamination Declaration70
Index72
Appendix A Additional Process Information/Instructions73
Installing the Devices84

Brand	Sartorius Stedim Biotech
Model	BIOSTAT STR
Category	Laboratory Equipment
Language	English

Sartorius Stedim Biotech BIOSTAT STR - User Manual

Table of Contents

Sartorius Stedim Biotech BIOSTAT STR Specifications

Related product manuals