Need help?Do you have a question about the Sartorius CISL1N and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Resolution | 800 x 600 pixels (SVGA) |
| Brightness | 250 cd/m² |
| Contrast Ratio | 500:1 |
| Operating Temperature | 0°C to +50°C |
| Dimensions | 310 x 240 x 50 mm |
| Weight | 2.5 kg |
| Backlight | LED |
| Power Consumption | 15W |
| Storage Temperature | -20°C to 60°C |
| Humidity | non-condensing |
Explains input methods through keypad and digital input port.
Explains the fundamental weighing operations and features.
Details external calibration and manual adjustment procedures with default weights.
Demonstrates weighing using tare values entered via the numeric keypad.
Introduces the Counting application for determining part counts based on weight.
Explains the Neutral Measurement application for determining part length, surface, and volume.
Describes the Checkweighing application for verifying sample weights against tolerance ranges.
Details the Classification application for determining if sample weights fall within defined weight classes.
Explains the Weighing in Percent application for obtaining weight readouts in proportion to a reference weight.
Describes the Averaging application for calculating weights as an average of multiple operations.
Explains weighing multiple components up to a defined total weight.
Describes the Totalizing application for adding weight values to a totalizing memory.
Covers device parameters like password, stability, units, and display accuracy.
Explains calibration and adjustment settings within the Setup menu.
Details the configuration of the COM1 interface for various communication protocols.
Explains the configuration of the UniCOM interface for various protocols and instruments.
Provides instructions for connecting an analog Sartorius platform or strain-gauge load cell.
Explains the procedure for activating the service mode to access advanced settings.
Details adapting analog/digital converter parameters to the connected load cell or weighing instrument.
Lists individual menu items for configuring the A/D converter.
Outlines the step-by-step procedure for configuring the A/D converter.
Explains how to enter geographical data for external adjustment and installation place.
Details manual input procedures for calibration, adjustment, and linearization weights.
Provides the procedure for performing external linearization of the weighing instrument.
To Next Page
