Sartorius combics 1 Service Manual

WCI5005-e03104
Service Manual
Sartorius Combics 1 | Combics 2
Models CIS1U | CIS2U | CISL1U | CISL2U
for Combics Indicators
and
Models CAPP.U-...-LU | CAPS.U-...-LU
for Combics Weighing Platforms
including Service Specifications
C
F
REF
O
K

Sartorius combics 1 Specifications

General

Brand	Sartorius
Model	combics 1
Category	Monitor
Language	English

Summary

Overview

Service Concept

Prerequisites for performing maintenance and repair work on Sartorius Combics scales.

Overview of the Models

Auxiliary Service Tools and Equipment

Lists essential special tools required for servicing the Combics scale.

Operating Concept

Keys below the Display

Configuring the Combics

Function of the Service Keys and Switches

A. Menu Access Switch

B. SBI/BPI Key

Activating the BPI Mode

Activating the xBPI Protocol

Activating the Service Mode

Working in the Service Mode

Menu Item 1-18: Entering Calibration/Linearization Weights

1-18-1: External User-defined Calibration Weight

Procedure for entering calibration weight without service mode.

1-18-2: Entering Linearization Weight

Procedure for entering linearization weights for the scale.

Calibration/Adjustment Routines in Service Mode (General Information)

Valid Locations for Use

Menu Item 1-9: Calibration/Adjustment Functions

1-9-1: External Calibration/Adjustment with Default Weights

1-9-3 External Calibration/Adjustment with User-defined Weights

Procedure for calibrating and adjusting using user-defined weights.

Repairing the Combics Indicator

Replacing the Front Panel

Replacing the Power Cable

Replacing the Power PCB

Replacing the DC/DC Converter

Replacing the A/D Converter

Replacing the Digital PCB

Adjusting the Weighing Platform

Adjusting the Off-center Load

Procedure for adjusting the off-center load on four-load-cell platforms.

Setting the Overload Stops

1. Weighing Platforms with One Load Cell: Steel

Repairing the Weighing Platforms

Replacing the Connecting Cable

Replacing Load Cells

Error Codes